IMPORTANT DreamLineTM reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technica
“BUTTERFLY” Rev.3 Ver.3 03/2014 10 10. Slide the pre-installed Door assembly 1 (as showing in Fig. 5) into the channel of the Guide rails (03)
“BUTTERFLY” Rev.3 Ver.3 03/2014 11 12. Slide the pre-installed Door assembly 2 (that showing on Fig. 10) into the channel of the Guide rai
“BUTTERFLY” Rev.3 Ver.3 03/2014 12 13. Attach the other Glass profile (02) at the right side of the door unit and fasten it to the Guide rails
“BUTTERFLY” Rev.3 Ver.3 03/2014 13 15. Attach the Roller stoppers (16) inside the top and the bottom Guide rails (03
“BUTTERFLY” Rev.3 Ver.3 03/2014 14 Shower Door Installation 16. The Tub or Shower base should be installed prior to installation. The Showe
“BUTTERFLY” Rev.3 Ver.3 03/2014 15 17. Push the Wall profiles (01) over the Glass
“BUTTERFLY” Rev.3 Ver.3 03/2014 16 18. Move the assembled Door unit on the Shower base or the Tub and butt the Wall profiles (01) up against th
“BUTTERFLY” Rev.3 Ver.3 03/2014 17 20. Make final adjustment if required. Drill the holes through the first layer into the Wall profiles (01) a
“BUTTERFLY” Rev.3 Ver.3 03/2014 18 22. Mount the Handles (17) onto the both Glass doors B & B2 (05). Cover the screw holes on the Handles
“BUTTERFLY” Rev.3 Ver.3 03/2014 1924. Apply silicone along the Wall profiles (01), as well as along the bottom Guide rail (03). See Fig
“BUTTERFLY” Rev.3 Ver.3 03/2014 2 Preparation 1. After opening all boxes and packages, read this introduction carefully. Check that all of
DREAMLINE™EXCLUSIVELIMITEDWARRANTYASOFMAY6,2013Thiswarrantyextendsonlytotheoriginalowner/end‐userforhouseholduseonlyandis nott
TEL: 866-731-2244 FAX: 866-227-1533 WWW.BATHAUTHORITY.COM For more information on DreamLineTM Shower Door and Tub D
“BUTTERFLY” Rev.3 Ver.3 03/2014 3Detailed Diagrams of Shower Door Components B2AA2B876910234511121314151617181319 Packing List 01 Wall prof
“BUTTERFLY” Rev.3 Ver.3 03/2014 4Shower Door Assembly Note: There are two separate Butterfly models featuring two different glass variations.
“BUTTERFLY” Rev.3 Ver.3 03/2014 5 2. Attach the top and the bottom Hinges (13) to the left edge of the Glass door A (04). Mind the position of
“BUTTERFLY” Rev.3 Ver.3 03/2014 6 4. Connect the Glass door A (04) to the Glass door B (05) using the Middle hinges (11). Mind the position of
“BUTTERFLY” Rev.3 Ver.3 03/2014 7 5. Place the other Glass door B2 (05) and the other Glass door A2 (04) on a flat surface. The distances from
“BUTTERFLY” Rev.3 Ver.3 03/2014 8 7. Attach the top and the bottom Hinges (13) to the right edge of the Glass door A2 (04). Mind the position
“BUTTERFLY” Rev.3 Ver.3 03/2014 9 9. Locate the Guide rails (03) and the Glass profile (02). Connect the left end of the Gu
Kommentare zu diesen Handbüchern