DreamLine SHST-01-PL Installationsanleitung PDF herunterladen (Seite 2)

“Folding Shower Seat” Rev.1 Ver.2 08/2013

Preparation

1. After opening all boxes and packages, read this introduction carefully. Check that all of the needed

parts are included in the package by marking all the components on the “Detailed Diagram of

Shower Door Components”. Examine boxes and packages for shipping damage. If the unit has

been damaged, has a finishing defect, or has missing parts, please contact our customer support

department within 5 business days of the delivery date. Please note that DreamLine

will not

replace any damaged products or missing parts free of charge after 5 business days or if the

product has been installed. Feel free to contact DreamLine

if you have any questions.

2. Please note that you should consult your local building codes with questions on installation

compliance standards. Building and plumbing codes may vary by location, and DreamLine is

not responsible for code compliance standards for your project and will not accept any

returns.

Additional wall support is required:

Installation of the wall mounted folding shower seat requires additional wood framing in a place

of installation. We recommend 2” x 12” or 2 (two) 2” x 6” wood blocking continuously installed

between the studs. Lower edge of the wooden block should be 13” from the top of the seat. You

may need to remove a portion of the sheetrock with tiles to install the wooden block. If you have

an access from the back it will be easier to cut a piece of sheetrock to install this additional wood

framing.

Max capacity: 250 Lbs when installing to the wall through the studs

ATTENTION!

This shower seat MUST NOT be mounted to sheetrock, drywall, plaster, fiberglass, acrylic or

other similar wall surfaces without appropriate wood or steel backing support material.

Tools Required

Tape

Measure Pencil

Screwdriver

Phillips Drill bit

Level

Drill

Electric

Hammer

(Ø=5/16")

1 2 3 4 5 6 7 8

Keine Kommentare

DreamLine SHST-01-PL Installationsanleitung Seite 2