DreamLine DL-6997-01CL Installationsanleitung

Charisma Tub Door & QWALL-TUB Kit Tub Door AND SHOWER BACKWALLS KIT INSTALLATION INSTRUCTIONS IMPORTANT DreamLineTM reserves the right to

Ver. 2, Rev. 1 9 10. Bring the Guide rail (01) over the top of the Guide rail brackets (11) and lock them together. Mark the drill holes in the Guide

Ver. 2, Rev. 1 10 11. Secure the Glass doors (03) onto the Roller assemblies (10) and fasten them with the provided bolts. Attach the Handle brackets

Ver. 2, Rev. 1 11 12. Slide the Glass doors (03) to the right side and secure the Left Guide block (13) to the left end of the Threshold (02). Drill

Ver. 2, Rev. 1 12 Fig. 17 Product Maintenance To ensure long lasting life for your acrylic back walls, wipe them off aft

QWALL TUB TUB ACRYLIC BACK WALL INSTALLATION INSTRUCTIONS IMPORTANT DreamLineTM reserves the right to alter, modify or redesign products at any tim

Preparation 1. After opening all boxes and packages, read this introduction carefully. Check that all of the needed parts are included in the packag

Detailed Diagram of Tub Back Wall Components 12437589106 Packing List 01 Side panel 2pcs 06 Wall anchor 21pcs 02 Back panel 2pcs 07 Countersunk

Back Panel Installation Instruction 1. Measure the distance of the back wall of the tub (corner to corner) The distance is “W” See Fig. 1 for det

3. Measure the side walls from the corner to the front point where the Side panel (01) is going to end. This distance is “D”. See Fig. 3 for deta

Fig. 5 5. Attach the Center cover (05) vertically at the center point along the line and mark the drilling holes throu

Ver. 2, Rev. 1 CHARISMA SHOWER/TUB DOOR INSTALLATION INSTRUCTIONS IMPORTANT DreamLineTM reserves the right to alter, modify or redesign product

Fig. 7 6. Attach the Corner cover (04) to the corner of the wall and mark the drilling holes through the predrilled hole

Fig. 9 7. Determine the position of both Back panels (02). NOTE: a) Narrow side of the Back panel cannot be trimmed and

8. Place the Back panel (02) on a flat piece of plywood or a particle board. Cut the side end of the Back panel by making a few deep scratches with

9. Mount the Center cover (05) to the center of the back wall using the Countersunk screws ST4.2×30 (07). Do not tighten the screws. Leave the Cent

11. Slide the right edge of the left Back panel (02) all the way behind the Center cover (05) and push the Back panel against the wall. You can adju

13. Align both Back panels at the top and tighten the screws on the Center cover (05) to secure this assembly in place. See Fig. 17 and Fig. 18 for

14. Determine the position of both Side panels (01). NOTE: a) Narrow side of the Side panel cannot be trimmed and should face the corner of the s

Fig. 21 16. Place the marks on the Side panel (01) which is going to the side wall with the fixtures according to the t

Fig. 23 17. Apply the sealant to the back surface of the Side panel (01). Apply the sealant around the drilled holes a

18. Slide the edge of the Side panel (01) all the way behind the Corner cover (04) and push the Side panel against the wall. Align the top of the Sid

Ver. 2, Rev. 1 2Preparation 1. After opening all boxes and packages, read this introduction carefully. Check that all of the needed parts are inclu

19. Apply the sealant to the back surface of the Side panel (01) for another side wall installation. See Fig. 27 for details.

Fig. 29 21. Fasten tight the Corner covers (04) and the Center cover (05) to secure the Side panels (01) and the Back p

22. Use decorative plugs to cover the screw holes in the Corner covers (04) and the Center cover (05). See Fig. 29 for details.

Tub Glass Shelves Installation Instruction 24. Find the desirable height for the Glass shelves (09) and mark the locations on the wall. NOTE: The G

Rev 1.1 21 10. Mount the Glass brackets (10) to the wall using the Countersunk screws ST4.2×30. NOTE: padded set screw of the Glass bracket should be

Rev 1.1 22 Product maintenance To insure long lasting life for your acrylic back walls, wipe them off after each use with a soft cloth. To clean the

DREAMLINE™EXCLUSIVELIMITEDWARRANTYASOFMAY6,2013Thiswarrantyextendsonlytotheoriginalowner/end‐userforhouseholduse onlyandisn

TEL: 866-731-8378 – 215-957-1411 FAX: 866-227-9245 – 215-893-1780 WWW.BATHAUTHORITY.COM Rev 1.1 24For more infor

Ver. 2, Rev. 1 3Detailed Diagram of Shower/Tub Door Components 1324568910111213714151617 Packing List 01 Guide rail 1pc 10 Roller assembly 4pcs 02

Ver. 2, Rev. 1 4Shower/Tub Door Installation 1. Measure your finished opening width. This distance is marked as “W”. See Fig. 1 for details.

Ver. 2, Rev. 1 5 Fig. 3 3. If the Threshold (02) has been cut off, the pre-drilled hole may be shifted. In this case you will

Ver. 2, Rev. 1 6 4. Place the Threshold (02) in the desired position and parallel to the front edge of the Shower base or the Tub. Measure the dista

Ver. 2, Rev. 1 7Height of the Guide Rail Bracket for Shower door. 6. Place your Guide Rail Bracket (11) at a height of 69-1/4” from the base and at

Ver. 2, Rev. 1 8 8. Mark the drill holes on the wall using the Guide rail bracket (11). Drill the holes using Ø 5/16” drill bit, insert the Wall anch