DreamLine DL-6995-01CL Installationsanleitung Seite 3

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 36
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 2
Rev 1.6
2
Preparation
1. After opening all boxes and packages, read this introduction carefully. Check that all of the
needed parts are included in the package, by marking all the components on the “Detailed
Diagram of Shower Door Components”. Examine boxes and packages for shipping damage. If
the unit has been damaged, has a finishing defect, or has missing parts, please contact our
customer support department within 3 business days of the delivery date. Please note that
DreamLine
TM
will not replace any damaged products or missing parts free of charge
after 3 business days or if the product has been installed. Feel free to contact DreamLine
TM
if you have any questions.
2.
Please note that you should consult your local building codes with questions on
installation compliance standards. Building and plumbing codes may vary by location,
and DreamLine is not responsible for code compliance standards for your project
.
3. Install all of the required plumbing and drainage before securing the shower. Have a competent
and licensed (if required by local code) plumber or tradesman do and/or approve your
plumbing installation.
4. Please insure that prior to the installation the installation surface is leveled and solid and will be
able to support the total weight of the unit. Also make sure the walls are at right angles. While
some adjustment in leveling of the door is possible, irregular installation surface level or
improper angle of side walls will result in serious problems for your installation. Please, note
that some adjustments and drilling might be necessary during the installation process.
Note: If glass has silk, print or molded designs, please make sure that clear side faces inside
the shower
Tools Required
Caulk
Tape
Measure Pencil
Screwdriver
Phillips
Level
Gun
Caulk
Drill
Electric
Hammer
Miter saw or Hacksaw
Drill bit
Drill bit
(Ø=5/16")
(Ø=1/8")
Seitenansicht 2
1 2 3 4 5 6 7 8 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare