
“QUATRA LUX” Enclosure Rev.1 Ver.2 04/2013
2
Preparation
1. After opening all boxes and packages, read this introduction carefully. Check that all of
the needed parts are included in the package by marking all the components on the
“Detailed Diagram of Shower Door Components”. Examine boxes and packages for
shipping damage. If the unit has been damaged, has a finishing defect, or has missing
parts, please contact our customer support department within 5 business days of the
delivery date. Please note that DreamLine
TM
will not replace any damaged products or
missing parts free of charge after 5 business days or if the product has been
installed. Feel free to contact DreamLine
TM
if you have any questions.
2. Please note that you should consult your local building codes with questions on
installation compliance standards. Building and plumbing codes may vary by
location, and DreamLine is not responsible for code compliance standards for your
project and will not accept any returns.
3. Please ensure that prior to the installation the installation surface is leveled and solid and
will be able to support the total weight of the unit. Also make sure the walls are at right
angles. Irregular installation surface level or improper angle of side walls will result in
serious problems for your installation. Please, note that some adjustments and drilling
might be necessary during the installation process.
4. This unit has to be installed against a finished floor and walls.
5. Please, NOTE! This door does not have out-of-plumb adjustment. Make sure your
walls are at right angles.
Tools Required
Caulk
Tape
Measure Pencil
Screwdriver
Phillips
(Ø 5/16")
Drill bit
Level
Gun
Caulk
Drill
Electric
Hammer
Knife
(Ø 1/8")
Drill bit
Kommentare zu diesen Handbüchern