
“QUATRA LUX” Enclosure Rev.1 Ver.2 04/2013
8
Fig. 9
9.
Get three measurements:
from the top edge of the Glass door (02) to
the top edge of the upper Hinge (06);
from the bottom edge of the upper Hinge to
the top edge of the bottom Hinge;
from the bottom edge of the bottom Hinge
to the surface of the shower base Cut the
Flanged anti-water strip (12) according to
the measurements.
Press the cut strips on to the vertical edge of
the Glass door. Press the Side anti-water
strip (11) on the vertical edge of the Return
glass panel (03) with the flange facing the
door.
Press the Bottom anti-water strip (13) on
the bottom edge of the Glass door.
Install the Handle (05) to the Glass door.
See Fig. 10 for details.
Fig. 10
xxx
1
2
3
4
6
5
Kommentare zu diesen Handbüchern